Local AI studio · Creator donations · Market engine · News in 10 languagesTelegramTrading DEX
Vantemio product status

Studio runs on Vantemio’s own channels. News, Academy, Passport and Bridge Swap are live. Donations are open on main networks. Market, Home and Cloud are in development.

Module 2 · Wallet and self-custody

Lesson 8 of 15

Networks and fees: why the same coin lives on different networks

Most lost transfers are not hacks. They are a wrong network or a missing coin for the fee. In this lesson you learn how networks and fees work, so your money always takes the right road.

  • 17 min
  • 8 steps
  • Basic

In this lesson you will learn

  • Explain why one token, like USDC, exists on several networks
  • Predict what can happen when a transfer uses the wrong network
  • Keep a little of the right coin (ETH on Base, SOL on Solana) to pay fees
  • Explain why fees change and which networks are usually cheap or expensive
  • Read which networks an exchange or app supports before you send
  • Describe what a bridge does and its risks

What you need

  • The lessons about wallets and about sending and receiving, finished
  • 15–20 minutes without rushing
  • Your wallet app or the Wallet trainer, to look at network names

Words to know

Network
One blockchain with its own computers, rules and main coin, for example Ethereum, Base or Solana. Like a separate road: a car on one road is not on another.
Gas
Another name for the network fee. It pays the computers that write your transfer into the shared notebook. It is paid in the network's own coin.
Native coin
The main coin of a network, used to pay fees: ETH on Ethereum and on Base, SOL on Solana.
Supported networks
The list of networks an exchange or app can send and receive on. A network that is not on the list may not work at all.
Bridge
A service that moves a token from one network to another. It locks the token on the first network and gives you a token on the second one.
Withdrawal fee
The fee an exchange charges when you send crypto out of your account. It can be different from the network fee.

Step by step

  1. Step 1

    See that one token lives on many networks

    In the first lesson of this module you learned that a token travels on top of a network. USDC is a good example. The same USDC exists on Ethereum, Base, Solana and several other networks 1.

    Think of the networks as separate roads 2. A bus on one road does not appear on another road by itself. USDC on Base and USDC on Solana are worth the same, about 1 dollar each, but they live on different roads. To move from one to the other, you need a special service, which you will meet in step 7.

    This is why your wallet shows the network next to every token 3. “10 USDC” is not the whole information. “10 USDC on Base” is. Make it a habit to read the token and the network together.

    Try it now

    Open your wallet or the Wallet trainer. Find the place where the network name is written.

    The same token on different networks. Read the token and the network together.Practice picture, not a real app
  2. Step 2

    Know what happens on the wrong network

    Imagine Amina expects USDC on Base. You choose Ethereum by mistake 1. What happens depends on the case, and the honest answer is: sometimes the money can be recovered, sometimes it cannot.

    Ethereum and Base use the same kind of address, starting with 0x. If Amina uses her own wallet, the USDC is at her address on Ethereum. She can see it after she adds the Ethereum network, but she needs ETH on Ethereum to move it, and fees there can be high 2.

    If the address belongs to an exchange and the exchange does not support that network, the money may never appear in the account 3. Some exchanges can help after a long wait and a fee. Others cannot help at all. Between very different networks, like Solana and Base, most wallets refuse the transfer because the address format is different. That refusal protects you.

    Important

    Never assume “it will arrive anyway”. Ask “Which network?” before every transfer, especially to an exchange.

    A wrong network turns a simple transfer into a problem, or a loss.Practice picture, not a real app
  3. Step 3

    Pay the fee in the network's own coin

    Every transfer pays a small network fee, also called gas. It goes to the computers that write your transfer into the shared notebook. The fee is always paid in the network's native coin 1: ETH on Ethereum, ETH on Base, SOL on Solana.

    This surprises many beginners. You can have 30 USDC on Base and still be unable to send it, because you have no ETH on Base for the fee 2. The wallet shows a message like “Not enough ETH for gas”. Your USDC is safe, it is just waiting.

    So keep a little of the native coin on every network you use 3. On cheap networks a very small amount is enough for many transfers. When you receive USDC on a new network for the first time, ask yourself: do I have the coin to pay the fee here?

    Do
    • Keep a little ETH on Base and a little SOL on Solana if you use those networks
    • Check the native coin balance before you plan a transfer
    Tip

    On Solana, sending a token to an address that has never held it can cost a little more the first time.

    No native coin, no transfer: the fee is paid in ETH or SOL, not in USDC.Practice picture, not a real app
  4. Step 4

    Understand why fees change

    The fee is not a fixed price. It changes with how busy the network is 1. Think of a bus at rush hour: when many people want a seat, the price goes up. When the bus is empty, it is cheap.

    When many people send transfers at the same moment, they compete for space on the next page of the notebook. The wallet suggests a fee that is high enough to be included soon 2. A minute later the fee can be different.

    Fees also depend on what you do. A simple transfer of a coin is the cheapest. Sending a token like USDC costs a bit more. Using an exchange app or another complex service on the network costs more again 3. The confirmation screen always shows the current fee before you approve.

    Tip

    If a fee looks much higher than usual and the transfer is not urgent, cancel before confirming and try again later.

    Fees rise when the network is busy and when the action is more complex.Practice picture, not a real app
  5. Step 5

    Compare cheap and expensive networks

    Networks differ a lot in cost. On Ethereum 1 a simple transfer can cost from cents to several dollars, and more on very busy days. For a transfer of 10 dollars, that can be a big part of the money.

    Newer networks like Base 2 and Solana 3 were built to be cheaper. A simple transfer usually costs a cent or less. This is why many people who send small amounts, for example to family, use such networks.

    Cheap does not mean better in every way. Each network has its own risks, its own apps and its own level of support from exchanges. This lesson does not recommend any network. It helps you understand the cost, so the fee never surprises you. Always look at the fee on the confirmation screen, not at what a friend paid last month.

    Never do
    • Do not send 5 dollars on a network where the fee could be 3 dollars
    The same 10 dollars can cost very different fees on different networks.Practice picture, not a real app
  6. Step 6

    Read which networks an exchange or app supports

    Before you send to an exchange or receive from one, open its deposit or withdraw page and choose the token. The exchange then shows a list of supported networks 1. Only these work. If your network is not on the list, do not send.

    When you choose a network, the exchange shows the deposit address for that network 2. The address for USDC on Base can be different from the address for USDC on Solana. Always take the address after you have chosen the network, never before.

    On the withdraw page, read two more lines. The withdrawal fee 3 is the exchange's own fee, and it can differ by network. The minimum amount tells you the smallest transfer it accepts. Some apps, like wallets or payment pages, also show the networks they accept, often as small network icons. Read them before you pay.

    Do
    • Choose the network on the exchange first, then copy the address
    • Read the withdrawal fee and the minimum amount
    Try it now

    If you have an exchange account, open its deposit page for USDC (do not send anything) and read the list of supported networks.

    Choose the network first, then copy the address that belongs to it.Practice picture, not a real app
  7. Step 7

    Understand bridges and their risks

    Sometimes your USDC is on one network and you need it on another. A bridge moves it 1. In simple words: the bridge locks your token on the first network and gives you a token on the second network. It takes time and fees on both sides.

    Bridges carry real risks 2. Some bridges have been hacked, and their users lost money. Scammers make fake bridge websites that look like real ones and empty your wallet. Some bridges give you a copy token with a slightly different name, for example with “.e” or “bridged” in it, and some apps and exchanges do not accept such copies.

    Often there is a simpler road 3. If your money is on an exchange, withdraw it directly on the network you need. Plan the network before you buy or receive, so you do not need a bridge at all. If you must use one, open it only from its official address, start with a tiny amount and check what token you will receive.

    Important

    Never open a bridge from a link in a chat, an ad or a message from a stranger. Fake bridges are a common way to steal everything in a wallet.

    A bridge moves a token between networks, with extra fees and extra risks.Practice picture, not a real app
  8. Step 8

    Plan every transfer with one checklist

    Now you can put it all together. Before every transfer, answer five questions 1. Which token? Which network? Does the receiver support this network? Do I have the native coin for the fee? Does the exchange show a memo?

    Let us plan Kofi's transfer again 2. He wants to send 30 USDC to Amina. He asks: “Which network?” She says: “Base.” Kofi checks that he has a little ETH on Base. He pastes her address, checks it, chooses Base, sends 1 USDC as a test, and waits for her message.

    Amina confirms that the test arrived 3. Kofi sends the rest. Total extra cost: one small fee. Total risk: almost none. This checklist takes about a minute, and it protects you from the most common and most expensive mistakes.

    Try it now

    Write the five questions on a small piece of paper and keep it near your phone until you know them by heart.

    Five questions and a small test protect every transfer.Practice picture, not a real app

Practise now: 15 minutes

Tick each task when you have done it.

Common mistakes

Mistake“USDC is USDC, the network does not matter.”

Do this insteadThe same token lives on different roads. Ask “Which network?” and choose exactly that one.

MistakeHolding only USDC and no native coin

Do this insteadKeep a little ETH on Base or SOL on Solana, or you cannot pay the fee to send.

MistakeCopying an exchange's deposit address before choosing the network

Do this insteadChoose the network first. The address can be different for each network.

MistakeOpening a bridge from a link in a chat

Do this insteadUse only the official address, start with a tiny amount, or withdraw directly on the right network instead.

MistakeExpecting the same fee as last time

Do this insteadFees change with how busy the network is. Read the fee on the confirmation screen every time.

Check yourself

Choose an answer. You will see at once if it is right.

  1. 1You have 30 USDC on Base but the wallet says “Not enough ETH for gas”. Why?

    Show the answer

    On Base the fee is paid in ETH, and you have none. The network fee is paid in the network's native coin. On Base that is ETH, not USDC.

  2. 2What does the network fee (gas) pay for?

    Show the answer

    The work of the computers that write your transfer into the notebook. The fee pays the computers that keep the network. It does not insure you and it does not go to the receiver.

  3. 3An exchange lists Base and Solana for USDC deposits. You hold USDC on Ethereum. What do you do?

    Show the answer

    Do not send on Ethereum: use a supported network. Only supported networks work. A deposit on another network may be lost or need a long support process.

  4. 4Why can the fee for the same transfer be higher today than yesterday?

    Show the answer

    The network is busier, so space on the next page costs more. Fees rise when many people send at the same time, like bus prices at rush hour.

  5. 5What is a safe habit with bridges?

    Show the answer

    Open the official address yourself and test with a tiny amount. Fake bridge sites and bridge hacks are real risks. Official address, tiny test, or no bridge at all if you can withdraw on the right network.

Remember

  • One token, like USDC, lives on many networks; read the token and the network together.
  • A wrong network can delay a transfer or lose it, especially when sending to an exchange.
  • The fee (gas) is paid in the network's native coin: keep a little ETH on Base and SOL on Solana.
  • Fees change with how busy the network is and with what you do; read the fee every time.
  • On an exchange, choose the network first, then copy the address, and read the withdrawal fee.
  • Bridges move tokens between networks but add risks; often withdrawing on the right network is simpler.
Next lesson · Lesson 9 of 15Exchange or DEX: where crypto is tradedPrevious lesson: Receive and send crypto without mistakes

The Academy never asks for your recovery phrase, private keys, passwords or card. Anyone who asks for them in Vantemio’s name is a scammer.