Lesson 11 of 15
Your first swap step by step
A swap is the most common thing people do on a DEX: you give one token and get another. In this lesson you go through a whole swap, screen by screen, and learn what every number means before you confirm.
In this lesson you will learn
- Choose the right network in the DEX and in your wallet
- Pick a token by its contract address, not only by its name
- Read a quote: price, price impact, slippage, minimum received and network fee
- Do the two steps of a first swap: approve, then swap
- Check the result in your wallet and in a block explorer
- Fix the most common failures: no coin for the fee and slippage too low
What you need
- Your own wallet with a small amount you decide on yourself, or the DEX trainer if you only want to practise
- A little of the network's main coin to pay fees (for example ETH on Base)
- 20 minutes without rushing
- The official address of the DEX, saved as a bookmark
Words to know
- Swap
- Exchanging one token for another in one transaction, for example 10 USDC for ETH. It is like changing money at a market stall, but the stall is a smart contract.
- Quote
- The offer the DEX shows before you swap: how much you pay, how much you receive and at what price. It changes every few seconds.
- Price impact
- How much your own trade moves the price. Small trades in popular tokens move it very little; big trades or rare tokens can move it a lot.
- Slippage
- How much worse than the quote you accept, for example 0.5%. If the price moves more than that before your swap goes through, the swap stops.
- Network fee (gas)
- The small fee the network charges for every transaction. It is paid in the network's main coin, for example ETH on Base or SOL on Solana.
- Block explorer
- A public website that shows every transaction on a blockchain. You use it to check that your swap really happened.
Step by step
Step 1
Choose the network
Open the DEX from your bookmark and connect your wallet, as in the previous lesson. At the top of the swap box there is a network selector 1. A network is like a separate road system: tokens on Base cannot be swapped on Solana in the same box. In this example we use Base.
Your wallet must be on the same network 2. If they do not match, the DEX shows a button like “Switch network”. Tap it, and your wallet asks you to confirm the switch. This is safe: switching a network moves no tokens.
Check that you have a little of the network's main coin for fees 3. On Base the fee is paid in ETH, even if you swap USDC. Without it, the swap cannot start. In this example the wallet has 25 USDC and 0.002 ETH, which is enough for several fees on Base.
Never do- Do not swap all of your ETH: keep a little for future fees
TipIf you are not sure which network your tokens are on, open your wallet and look at the small network icon next to each token. Swap only on that network.
dex.example/swapEthereumBaseSolana1Wallet networkBase2Balance for fees0.002 ETH3Balance25 USDCThe DEX and the wallet are on the same network, with a little ETH for the fee.Practice picture, not a real app Step 2
Choose the tokens by contract address
Tap the top token box and choose what you pay: USDC. Then tap the bottom box and choose what you receive: ETH. A list of tokens opens. When you type a name, you may see several tokens with the same or similar name 1.
Remember: anyone can create a token called “USDC”. The name and the logo prove nothing. Tap the small info icon or the address under the name to see the contract address 2. Compare it with an official source: the issuer's website or the token page in a block explorer you opened from your bookmark.
Many DEX sites show a warning for tokens that are not on their usual list 3, for example “This token is not verified. Anyone can create a token with any name.” Take this warning seriously. A beginner never needs a token that the DEX itself warns about.
Do- Compare the first 4, the last 4 and then the middle characters of the address
- Write down the checked addresses of tokens you use often
Never do- Do not choose a token only because it is first in the list
- Do not paste a token address from a chat or an ad
Select a tokenSearchUSDCUSDC0x7a3f…c91e — matches the official list1Contract address0x7a3f…c91e2USDC.e-bonus0x91c4…07ad — not verifiedThis token is not verified. Anyone can create a token with any name.
3Two tokens with similar names. Only the contract address tells them apart.Practice picture, not a real app Step 3
Enter a small amount and read the quote
Type the amount you pay in the top box 1. For your first swap, use a small amount, for example 10 USDC. Small mistakes cost little, and you learn the same steps.
The bottom box now shows what you receive 2: about 0.004 ETH. Under it the DEX shows the rate 3: here 1 ETH = 2,500 USDC. This is only an example price. Real prices change all the time, and they can fall as fast as they rise.
The quote is fresh only for a short time. Many DEX sites refresh it every 10–30 seconds. If you wait a few minutes before confirming, the numbers will change. That is normal. Always read the numbers again just before you tap “Swap”.
Try it nowIn the DEX trainer, type 10 USDC in the top box and read the result and the rate out loud.
dex.example/swapYou pay10USDC1You receive0.004ETH2Rate1 ETH = 2,500 USDC3Quote refreshes in 15 s
A small amount in the top box, the result and the rate below it.Practice picture, not a real app Step 4
Understand price impact and slippage
Tap the arrow next to the rate to see the details. The first line is price impact 1. It shows how much your own swap moves the price. For 10 USDC of a popular token it is tiny, for example less than 0.01%. If price impact is high, like 5% or more, your trade is too big for that market or the token is rare. Stop and check.
The second line is slippage 2, for example 0.5%. Prices move while your transaction travels to the network. Slippage is how much worse than the quote you agree to accept. Think of a bus ticket: you agree to pay up to 5% more if the price changes on the way, but not more. If the price moves more than that, the swap stops and your USDC stays with you.
Leave slippage on the default or “Auto” for your first swaps 3. Very high slippage, like 10% or 20%, is dangerous. Some bots watch the network and use a high setting to give you a worse price on purpose.
ImportantNever set slippage very high because a site or a chat tells you to. Fake tokens often need 20–50% slippage because they are built to take your money.
Swap detailsPrice impact<0.01%1Max slippage0.5%2Auto0.5%1%Custom3High price impact (5% or more) means the trade is too big or the token is rare.
Price impact is your effect on the price. Slippage is how much worse you accept.Practice picture, not a real app Step 5
Read minimum received and the network fee
Two more lines decide what you really get. Minimum received 1 is the smallest amount you will get after slippage. With 0.004 ETH and 0.5% slippage it is about 0.00398 ETH. If the result would be less than this, the swap stops.
The network fee 2 is what the network charges for the transaction. On Base it is often a few cents, in this example 0.01 USD paid in ETH. On other networks, at busy times, it can be much more. Compare the fee with your amount: paying 3 dollars of fee to swap 10 dollars makes no sense.
Some DEX sites also show their own fee or route 3. The route shows through which pools your swap goes. You do not need to understand every pool. Just check that the total of what you pay and what you receive makes sense to you.
TipWrite the minimum received on paper. After the swap, check that you got at least this much.
Swap detailsMinimum received0.00398 ETH1Network fee~0.01 USD (in ETH)2RouteUSDC → ETH, 1 pool3You pay10 USDCMinimum received and the fee tell you what the swap really costs.Practice picture, not a real app Step 6
Approve, then swap
The first time you swap USDC on this DEX, you see two steps 1. Step one is “Approve USDC”: a permission for the DEX contract to move your USDC. Step two is “Swap”. On networks like Ethereum and Base this is normal. On Solana a swap usually needs only one confirmation.
Tap “Approve USDC”. Your wallet opens. Check the spender and change “Unlimited” to your own amount 2, here 10 USDC, as you learned in the previous lesson. Confirm and wait a few seconds until the DEX shows that the approval is done. This approval costs one network fee.
Now the button “Swap” becomes active 3. Tap it. The DEX shows the final numbers one more time. Read them: you pay 10 USDC, you receive about 0.004 ETH, minimum 0.00398 ETH. Then tap “Confirm swap”.
Never do- Do not approve “Unlimited” just to save one small fee next time
dex.example/swap- 1. Approve USDC
- 2. Swap
Approval amount10 USDC2Approve USDCSwap3Two steps for the first swap: a limited approval, then the swap.Practice picture, not a real app Step 7
Confirm in the wallet and check the result
Your wallet opens with the swap transaction 1. Read the main line: “Swap 10 USDC for ETH”, the site name and the network fee. If all of it matches, tap “Confirm”. If something is different, cancel.
After a few seconds the DEX shows “Swap complete” with a link like “View on explorer” 2. Open it. The block explorer shows the status “Success”, your address, the contract and the tokens moved. This is the proof on the blockchain. It is the same for everyone and nobody can edit it.
Now open your wallet. You should see 15 USDC and a little more ETH 3. If you received a token your wallet does not show yet, tap “Import token” or “Add token” and paste the contract address from the official source. Never add a token from a link in a message.
Try it nowIn the DEX trainer, finish the swap and find the status line on the result screen.
explorer.example/tx/0x4b2e…9f10ActionSwap 10 USDC for ETH1StatusSuccess2Tokens moved10 USDC → 0.00399 ETHFee0.000004 ETH15 USDC · 0.00599 ETHYour wallet after the swap3The explorer proves the swap happened. Your wallet shows the new balance.Practice picture, not a real app Step 8
Fix the common failures
Not enough coin for the fee 1. The DEX or wallet says “Insufficient ETH for gas” or something similar. You have USDC, but no ETH to pay the network. Send a small amount of ETH on the same network to your wallet, then try again.
Slippage too low or price changed 2. The swap fails with a message like “Price moved” or “Transaction failed”. On networks like Ethereum and Base, a failed transaction still costs the network fee, because the network did the work. Refresh the quote and try once more. If it fails again, raise slippage a little, for example from 0.5% to 1%, never to 10% or more.
Stuck or pending 3. Sometimes a transaction waits for a few minutes. Do not tap “Swap” again and again: you could end up with two swaps. Open the explorer and wait for “Success” or “Failed”. When you see the result, you know what to do next.
Do- Keep a little of the network's main coin for fees
- Check the explorer before you repeat a swap
Never do- Do not raise slippage to 10% or more to force a swap through
WalletInsufficient ETH for gas
1Transaction failed: price moved more than 0.5%
2Pending… check the explorer before trying again
3Three common messages and what each one means.Practice picture, not a real app
Practise now: 15 minutes
Tick each task when you have done it.
Common mistakes
MistakeChoosing a token by its name only
Do this insteadCompare the contract address with an official source.
MistakeSwapping all your ETH and leaving nothing for fees
Do this insteadAlways keep a little of the network's main coin for future fees.
MistakeSetting slippage to 20% because the swap failed
Do this insteadRefresh the quote and raise slippage only a little, for example to 1%.
MistakeTapping “Swap” again while the first one is pending
Do this insteadOpen the explorer and wait for the result before you try again.
MistakeAdding a token from a link in a message
Do this insteadUse “Import token” with an address from an official source.
Check yourself
Choose an answer. You will see at once if it is right.
1You want to swap USDC on Base, but you have no ETH at all. What happens?
Show the answer
The swap cannot start: you need a little ETH for the network fee. On Base the network fee is paid in ETH. Without it, the transaction cannot be sent.
2Two tokens in the list are called “USDC”. How do you pick the right one?
Show the answer
Compare the contract address with an official source. Names and logos can be copied. The contract address is unique.
3What does a slippage of 0.5% mean?
Show the answer
You accept a result up to 0.5% worse than the quote; otherwise the swap stops. Slippage is your limit. If the price moves more than that before the swap goes through, it stops and your tokens stay with you.
4Why does the first swap of USDC show two steps?
Show the answer
First you approve the contract to move your USDC, then you swap. On networks like Base a contract can move your token only after your approval. The swap is the second step.
5Your swap shows “Pending” for 2 minutes. What do you do?
Show the answer
Open the explorer and wait for “Success” or “Failed”. Repeating can create a second swap. The explorer shows the real status.
Remember
- Put the DEX and the wallet on the same network and keep a little of its main coin for fees.
- Choose tokens by contract address, never by name alone.
- Start small and read the quote, price impact, slippage, minimum received and fee before you confirm.
- The first swap of a token on networks like Base has two steps: a limited approval, then the swap.
- Check the result in the explorer and in your wallet.
- If a swap fails, find the reason first; raise slippage only a little.
The Academy never asks for your recovery phrase, private keys, passwords or card. Anyone who asks for them in Vantemio’s name is a scammer.